See other templatesSee other templates

0 - 10V Output

16-bit 0 to 10V analog output corresponding to weight is provided in the form of linear voltage to drive PLC controllers for process control applications. Relay indication provided to show availability of 0-10V voltage output.

  • 16-bit 0 to 10V analog output corresponding to weight is provided in the form of linear voltage to drive PLC controllers for process control applications.
  • Relay indication provided to show availability of 0-10V voltage output.
  • Convenient Housing (96 x 48 x 120 mm) which can be easily mounted on panels.
  • Loadcell port to connect single weigh platform.
  • Seven Segment 5 digit Red LED display to show weight.
  • Four key front mount keypad for easy operation.
  • One Relay Output: Indication for target achieved condition.
  • Indication LED for relay status.
  • 230 V AC operation.
  • SMPS power supply to operate over a wide input range (90 to 270v).
  • Easy software calibration and setting procedures.
  • Ability to withstand harsh industrial environment and atmospheric temperature variations.
  • Processor
8051 controller
  • Processor Clock

18 MHz.

  • Power Supply
SMPS Design
  • A/D Clock
2 MHz
  • Output
One Relay (Potential free contact)

0 - 10V output

  • Keypad
 4 key front mount keypad
  • A/D Converter
Sigma Delta Type with 24 bits resolution
  • Conversion Speed
20 samples per second
  • Load Cell Excitation
6V @ 150mA current capability to drive up to 6 load cells of 350 ohms input resistance
  • Signal Sensitivity
1 micro volt to 3 micro volts per division of weight (unit weight)
  • Indications

 

Buzzer for fault and data entry

LED for process status / relay status

  • Display

 

5 digit ½” RED Seven Segment LED display
  • Protection

 

Input line filter for EMI and RFI suppression

 

2.5 A Fuse for AC power input

 

Spike suppressor for  input power
  • Input Voltage

90V to 270V AC @ 50Hz/60Hz

 

  • Power Consumption
10VA (approx.)
  • Environment

 

Operating Temp - 0o to 55o C

 

Humidity - upto 95% RH non condensing
  • Mechanical

Dimensions: Case Size: 92mm(w) x 44mm(h)x120mm(d)

 

Bezel size: 96x48mm

Panel cut out :92x44 mm

Depth: 140mm

Weight: 300 gms (approx.)

 

  • Enclosure type
Panel Mount with sheet metal & extruded aluminum sections
  • Industrial automation
  • PLC Integration
  • Concrete Batching Plant

Click here to download our brochure

Go to top