See other templatesSee other templates

BC-04

Batch controller BC04 is state of the art industrial batching controller. “BC04” find its utility in industrial automation applications. It takes weight based input from load cells and generates control using potential free relay outputs. It is having provision to connect external proximity switches for external controls or interlocking the process.

  • 32 bit ARM processor.
  • Sigma Delta type 24 bit ADC.
  • Two Seven Segment LED displays for weight, process indication.
  • SMPS power supply.
  • 16key front mount keyboard.
  • 6 potential free relay outputs with isolation and electrical noise immunity.
  • 5 digital inputs (DI) for connecting external switches/sensors.
  • RS232 port for continuous transmission of current weight.
  • Table top port for connecting external wired displays.
  • Panel mount industrial housing.
  • Analog output 4-20mA , 0-10V (OPTIONAL).
  • Password protected Installation settings.
  • 3 step software calibration.
  • Multi step Smart Calibration.
  • Zero, weight tracking feature.
  • Vibration control features.
  • Self-test for display / relay / DI's
  • Factory set Logic of operation, customized as per need.
  • Manual inflight correction.
  • Counter , totalizer.
  • Auto / Manual mode of working (OPTIONAL).
  • Auto inflight correction (OPTIONAL).
  • RS485 communication / modbus protocol (OPTIONAL).
  •  Processor
 

32 bit ARM processor

  •  Processor Clock
 

50 Mhz

  • Display
 

Two numbers 6-digit red 7-segment LED display

  • Power Supply
  SMPS type with EMI/RFI filter and Spike Suppresser
  • Fuse
 

750mA for AC power in

  • A/D Converter Resolution
 

Sigma Delta Type with 24 bits resolution

  •  Conversion Speed
 

50 Hz

  •  Load cell excitation
 

8V @ 300mA (up to eight load cells of 480 ohms each).

  • Input Signal
 

1 to 3 µV per division of weight

  •  Signal/Unit weight
 

1micro volt to 3 microvolts

  •  Keypad
 

16-key front mount keypad for data & function entries.

  •  Serial Port
 

RS-232C port for computer interface or remote display interface

  •  Remote Display Port
 

9-pin D-shell female connector for optional ½”/ 1”/2.3”/ 4” 6-digit bright red LED display.

  •  Indications
 

Buzzer for fault and data entry

  •  Output
 

6 inbuilt potentional free relay output for driving solenoid valves/contractor switches

  •  Digital Input
 

5 Digital input for connecting remote switches OR other interlocking signals.

  •  Protection
 

a) RFI/EMI filter and varistors

    b)Spike suppressor for input transients.
  •  Input Voltage
 

90 V -270 V AC @ 50 Hz/ 60 Hz.

  •  Power Consumption
  10 VA (approx)
  •  Environment
  Operating Temp: 10° to +55° Celsius
Humidity: 0 to 95% relative humidity non-condensing
  •  Mechanical
  Industrial panel mounting enclosure with sheet metal and extruded alummium section.
Dimensions: Case size: 184 x 90 x 198 mm(W) (L) (H)
Bezel Size 190 x 96 mm
Panel cut out 184 x 90 mm
Depth : 220 mm with rear panel connector
  • Bag Filling
  • Oil Filling
  • Biscuit Plant

Click here to download our brochure

Go to top